Daewoo DSA-095L Especificaciones descargar pdf (Pagina 71)

OUTDOOR UNIT

◆DSA-095L

PROCEDURES PHOTOS

1.Stop the operation of the air conditioner and disconnect the wire from

Indoor Unit to Outdoor Unit.

2. Disassemble the case. (Fig 1~2)

1 Remove the Top Panel. (Loosen thirteen screws)

2 Remove the Front Cabinet. (Loosen six screws)

3 Remove the Side Cabinet. (Loosen seven screws)

4 Remove the Guide Support. (Loosen two screws)

3. Removing the Propeller Fan. (Fig 3)

1 Loosen the Nut fixed at the the Propeller Fan.

2 Remove the Plain Washer.

3 Remove the Propeller Fan.

4. Removing the Motor ODU. (Fig 4)

1 Loosen four screws fixed at the Bracket Motor.

2 Disconnect the wire at the Control Panel and remove the Motor ODU.

5. Removing the Dual Capacitor. (Fig 5)

1 Disconnect the wire at the Control Panel.

2 Loosen the screw fixed at the Clamp Capacitor.

3 Remove the Dual Capacitor.

6. Removing the partition panel

7. Removing the Over load Protector. (Fig 6~7)

1 Loosen the Hex Nut at Terminal Cover.

2 Remove the Terminal Cover.

3 Remove the wire at the Over load Protector.

4 Remove the Over load Protector.

Fig 5

Fig 4

Fig 6

Fig 7

Fig 1

Fig 3

Fig 2

1 2 ... 66 67 68 69 70 71 72 73 74 75 76 ... 97 98

Sin comentarios

Daewoo DSA-095L Especificaciones Pagina 71