
1
TABLE OF CONTENTS
How to Use Application Guide Inside Front Cover
Location of Block Heater Inside Front Cover
Five Most Common Failure Problems Inside Front Cover
PAGE
Automotive and Light Truck Applications 2-19
Agricultural Applications 20-23
Heavy Duty Truck Applications 24-39
Industrial Application 40-57
Ether Start Systems 58-65
Installation and Information
Freeze Plug 66
Lower Radiator Hose Heater 67
External Tank Heater 68-71
Magnetic Heater 72
Dipstick Heater 72
12-Volt Interior Heaters 73
Silicone Pad Heaters 74
Battery Pad & Battery Blanket 75
Immersion Heaters & Diesel Fuel Heaters 76
Replacement Cords 77
Extension Cords 77
Auxiliary Heaters 78
Thermostatically Controlled Cords 79
Truck Wire Receptacles “Y” Cords 79
CarQuest Cord List 80
Technical Information Inside Back Cover
IMPORTANT...
To obtain satisfactory results from your engine heater, please read the following information carefully:
DO NOT USE A KAT’S ENGINE HEATER WHEN USING A 100% SOLUTION OF ANTIFREEZE.
A. These heaters are equipped with a three prong (grounding) plug and should be connected to a properly grounded
circuit.
B. If an extension cord is used in conjunction with this heater, be certain that the wire size of the extension cord is of
adequate size for the wattage of the heater and distance from the receptacle to the heater. Consult a licensed
electrician if further information is required.
C. Do not start engine with heater plugged in. Element hot spots could occur causing the element to burn out.
Comentarios a estos manuales