
After turning the control power,①
P r o - C -
is displayed in status mode.
After turning on the main power,②
P r o. 0 7 5
(capacity display) and
U - - C O N
(control mode) is displayed, initial values set in parameter
No.32.(example:
r 0 0 0 0
)is displayed.
Increment/Decrement of ADDRESS and DATA can be selected by③
UP
DOWN
button,
Storage of DATA can be selected by
SET
button.
6.2.2. Display Flowchart
Initializing after
turn on power
DOWN UP
Status display
Accumulated
command pulses
Accumulated
electronic gear
command pulses
Accumulated
feedback pulses
Residual
pulses
Max load ratio
Command pulses
frequency
MODE
Effective load
ratio
Torque command
voltage
Speed command
voltage
Running speed
Diagnosis
display
Sequence DI-DO status S/W version Rotor position
Parameter reset DO TEST
TCMD OFFSET VCMD OFFSET JOG DRIVE TEST DRIVE
Alarm Display
ALARM HISTORY
DISPLAY MODE
1
trace back
2
trace back
3
trace back
4
trace back
9
trace back
8
trace back
7
trace back
6
trace back
5
trace back
Parameter
setting
NO. 00 NO. 01 NO. 02 NO. 03
NO. 20
NO. 35 NO. 34 NO. 33 NO. 32
Comentarios a estos manuales